Pioneer RS-P90 Bedienungsanleitung PDF herunterladen (Seite 38)

Audio Adjustment <Network>

Adjusting the filter

First, determine the approximate band to be used, taking into consideration the reproduced

frequency band and the characteristics of the connected speaker.

7. Set up the cut-off frequencies of each filter for all the bands.

Repeat steps 5 and 6 to adjust each filter so that the band used and crossover frequency

are appropriately located.

6. Press the 2/3 buttons to set up

the cut-off frequency of the

selected filter (crossover

frequency).

Holding down these buttons continues

their operations.

5. Press FUNCTION buttons 1 or 2

and select the filter to be

adjusted.

Press the button to switch the band to

be adjusted and high pass filter/low

pass filter.

4. Press FUNCTION button 6 and

select left (Left) or right (Right)

channel (only for L/R mode).

Each press the FUNCTION button 6

switches left and right channel.

• Even when using the left/right combine

mode you can switch to display left and

right channels, but adjustments are those

performed in the left/right combine

mode.

3. Press the FUNCTION button 6 for two seconds and switch between

left/right independent mode (L/R) and left/right combine mode (COM).

2. Press the FUNCTION button 1.

The display switches to filter adjustment screen, allowing filter adjustments.

1. Open the cover of the remote control in the network menu (refer to page 5).

This switches to network menu setting screen.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 62 63

Keine Kommentare

Pioneer RS-P90 Bedienungsanleitung Seite 38