Pioneer XW-LF1-W Bedienungsanleitung PDF herunterladen (Seite 25)

English Français Español

The

Bluetooth

device cannot

be connected or operated.

Sound from the

Bluetooth

device is not emitted or the

sound is interrupted.

Check that no object that emits electromagnetic waves in the

2.4 GHz band (microwave oven, wireless LAN device or

Bluetooth

wireless technology apparatus) is near the unit. If such an object is

near the unit, set the unit far from it. Or, stop using the object

emitting the electromagnetic waves.

Check that the

Bluetooth

device is not too far from the unit and that

obstructions are not set between the

Bluetooth

device and the unit.

Set the

Bluetooth

device and the unit so that the distance between

them is less than about 10 m* and no obstructions exist between

them.

*The distance given is to be used as a rough guide. The actual

allowable distance between devices may vary depending on

conditions in the surrounding environment.

The

Bluetooth

device may not be set to the communication mode

supporting the

Bluetooth

wireless technology. Check the setting of

the

Bluetooth

device.

Check that pairing is correct. The pairing setting was deleted from

this unit or the

Bluetooth

device. Reset the pairing.

Check that the profile is correct. Use a

Bluetooth

device that

supports A2DP profile.

Check that the

POWER

indicator is not lit white. If it is, it means

that the unit is already connected to another

Bluetooth

device. Use

the already connected

Bluetooth

device to cancel the connection,

and then try connecting again.

Check that the stereo mini-plug cable is not inserted into the unit.

When the stereo mini-plug cable is inserted, the unit will prioritize

output of the

AUX

sound. Remove the stereo mini-plug cable.

Pairing cannot be performed

using the NFC function.

Check the device to be connected support NFC.

Ensure that the NFC function on the device you are trying to

connect is turned on.

When pairing devices, move the NFC area (page 17) on this unit

close to where the NFC antenna on the device to be paired.

Use a compatible device with Android OS 4.1 or later.

This may not operate properly, depending on the smartphone or

tablet device.

When the NFC-equipped smartphone is held against this unit,

confirm that the

POWER

indicator on this unit flashes once. If it

does not flash, it means that the NFC-equipped smartphone could

not be detected by this unit. Move the NFC antenna on the NFC-

equipped smartphone close to the NFC area (page 12) on the unit. If

the smartphone is using a case, then try this by removing the case.

Problem Remedy

LFA_En.fm 25 ページ２０１４年５月１２日　月曜日　午後３時３９分

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Pioneer XW-LF1-W Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heimkinosysteme Pioneer XW-LF1-W