Pioneer AVH-P7800DVD Bedienungsanleitung PDF herunterladen (Seite 97)

! OFF – No video component is connected

! VIDEO – External video component (such

as portable video player)

! B.UP CAMERA – Rear view camera

When rear view camera is

connected to AV input 2

CAUTION

Pioneer recommends the use of a camera

which outputs mirror reversed images, other-

wise screen image may appear reversed.

You can install a rear view camera onto the AV

input 2 and display a rear view camera video.

When the gear shift is in REVERSE (R) posi-

tion, the video automatically switches to a rear

view camera video. (For more details, consult

your dealer.)

! After you set up the rear view camera set-

ting, move the gear shift in REVERSE (R)

and confirm if a rear view camera video

can be shown on the display.

! If the display should be switched to a rear

view camera video by error while you are

driving forward, change the rear view cam-

era setting.

! To end watching a rear view camera video

and return to the source display, press and

hold V.ADJUST.

1 Touch AV INPUT 2 on the setup menu to

select B.UP CAMERA.

2 Touch B. CAMERA POLARITY on the

setup menu to select an appropriate set-

ting for polarity.

Each time you touch B. CAMERA POLARITY it

switches between the following polarity:

! BATTERY – When the polarity of the con-

nected lead is positive while the gear shift

is in REVERSE (R) position

! GROUND – When the polarity of the con-

nected lead is negative while the gear shift

is in REVERSE (R) position

Setting the automatic open

function

To prevent the display from hitting the shift

lever of an automatic vehicle when it is in P

(park) position, or when you do not wish the

display to open/close automatically, you can

set the automatic open function in the manual

mode.

% Touch AUTO FLAP on the setup menu

to select the display to open/close automa-

tically or manually.

Each time you touch AUTO FLAP it switches

between the following settings:

! AUTO – The LCD panel will be opened or

closed automatically with the turning of the

ignition switch on or off

! MANUAL – You have to press

OPEN/CLOSE to open/close the LCD

panel

Adjusting the LCD panel

slide position

You can adjust the LCD panel slide position so

that the panel is set back or forward.

% Touch FLAP SET BACK on the setup

menu to turn the set back on.

The LCD panel slides to the back.

# Touch FLAP SET BACK again to turn the set

back off and the LCD panel slides to the front.

Setup

En

97

Section

18

Setup

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 130 131

Kommentare zu diesen Handbüchern

Keine Kommentare