Pioneer N-50 Betriebsanleitung PDF herunterladen (Seite 22)

Additional information10

When a USB storage device is connected

When computer is connected via USB cable

Problem Check Remedy

USB storage device is not

recognized.

Is the USB storage device properly

connected?

Connect the device securely (all the way in).

Is the USB storage device connected

via a USB hub?

This unit does not support USB hubs. Connect the USB

storage device directly.

This is not a problem with this unit. Turn the power off then back on.

Some USB storage devices may not be recognized properly.

This unit only supports USB mass storage class devices.

Only the FAT16 and FAT32 file systems are supported. Other

file systems (ex. FAT, NTFS, etc.) are not supported.

This device does not support the use of external hard disc

drives.

A USB storage device is

connected and displayed,

but the audio files stored

on the USB storage

device cannot be played

back.

The audio files are copyrighted. Copyrighted audio files stored on a USB storage device

cannot be played back. Attempting to import music data

from a CD, etc., to a computer may cause the invocation of

copy protection, depending on the settings.

The file format cannot be properly

played back on this unit.

See the list of file formats that can be played back on this

receiver (page 25).

Much time is required to

recognized the USB

storage device.

What is the USB storage devices

capacity?

Some time may be required to load the data when large

capacity USB storage devices are connected (this could

take several minutes).

Power is not supplied to

the USB storage device.

Does an error message appear in the

front panel display?

No power is supplied if the power

consumption is too high.

Turn the power off then back on.

Turn the power off, then disconnect and reconnect the USB

storage device.

Press

FUNCTION

to switch to the other mode, then switch

again to the

USB

mode. (When the input is switched back to

USB

Problem Check Remedy

When the

DIGITAL IN

USB

port is connected to

a computer via USB

cable, audio files on the

computer cannot be

played.

Has the proper device driver been

installed on the computer?

When using a USB cable to connect the unit’s

DIGITAL IN

USB

port to a computer in order to play audio files on the

computer, the proper device driver must be downloaded

from the Pioneer website and installed on your computer.

Consult the Pioneer website for instructions on installing

the driver.

Network

No sound is produced

when attempting to play

files on a computer.

Are volume settings correct for the

OS and application program?

Raise the volume settings as required.

Is the OS audio output set to MUTE? Cancel the MUTE setting.

Are multiple applications running

simultaneously?

Try closing applications that are not in use.

Are volume settings correct for the

OS and application program?

For audio device select “Pioneer USB Audio Device”.

Problem Check Remedy

Cannot access to the

network.

The LAN cable is not firmly

connected.

Firmly connect the LAN cable (page 7).

The router is not switched on. Switch on the router.

Cannot access to the

component or PC

connected via network.

Internet security software is currently

installed in the connected

component.

There are cases where a component with Internet security

software installed cannot be accessed.

The audio component on the network

which has been switched off is

switched on.

Switch on the audio component on the network before

switching on this unit.

The component connected to the

network is not properly set.

If the client is automatically authorized, you need to enter

the corresponding information again. Check whether the

connection status is set to “Do not authorize”.

There are no playable audio files on

the component connected to the

network.

Check the audio files stored on the component connected to

the network.

Playback does not start. The component is currently

disconnected from this receiver or

the power supply.

Check whether the component is properly connected to this

receiver or the power supply.

The PC or Internet radio is

not properly operated.

The corresponding IP address is not

properly set.

Switch on the built-in DHCP server function of your router,

or set up the network manually according to your network

environment (page 19).

The IP address is being automatically

configured.

The automatic configuration process takes time. Please

wait.

Problem Check Remedy

N-50-K_En.book 22 ページ２０１１年９月７日　水曜日　午後５時４分

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Pioneer N-50 Betriebsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Digitale Mediaplayer Pioneer N-50