Pioneer DEH-3770MP Bedienungsanleitung PDF herunterladen (Seite 21)

- How to hold the Mechanism Unit

1. Hold the top and bottom frame.

2. Do not squeeze top frame's front portion too tight,

because it is fragile.

- Removing the Upper and Lower Frames

1. With a disc clamped, remove the four springs (A),

the two springs (B), the two springs (C), and the

four screws.

2. To remove the upper frame, open it on the fulcrum

3. While lifting the carriage mechanism, remove the

three dampers.

4. With the upper and lower frames removed, insert

the connectors coming from the main unit and

eject the disc.

Caution: Before installing the carriage mechanism in

the lower frame, be sure to apply some alcohol to

dampers and set the mechanism to the clamp mode.

- Removing the Guide Arm Assy

1. Remove the upper and lower frames and set the

mechanism to the clamp mode.

2. Remove the two springs.

3. Remove the two screws and bevel gear bracket.

(See page 22.)

Note that the gears come off.

4. Slide the guide arm assy in the direction marked

with the arrow 1 and open it upwards.

5. At the angle of about 45 degrees, slide the guide

arm assy in the direction marked with the arrow

3 to remove it.

Do not squeeze.

Lower Frame

Guide Arm Assy

Spring

Damper

Carriage Mechanism

Damper

Upper Frame

Screw

CX-3158

3. DISASSEMBLY

1 2 ... 16 17 18 19 20 21 22 23 24

Keine Kommentare

Pioneer DEH-3770MP Bedienungsanleitung Seite 21