Pioneer DDJ-SB Bedienungsanleitung PDF herunterladen (Seite 16)

8 Operate an effect level control to adjust the effect

level.

Turn the effect level control a little more clockwise to raise the effect

level.

With this operation, all three effects are active.

9 Turn the effects off.

Press the effect 1 button to turn the first effect off.

Press the effect 2 button to turn the second effect off.

Press the effect 3 button to turn the third effect off.

! When multiple effects are on, their respective effect levels are the

same.

The effect levels of the respective effects cannot be adjusted

individually.

Performing the operations for adjusting

the effect level and adjusting the effect

time alternately

The explanation below describes performing the operations for adjusting

the effect level and adjusting the effect time alternately as an example.

Note that the procedure described in this manual is just one example;

operation is also possible using other procedures.

Example of operation

1 Adjust the effect level from 0 % (control turned fully counterclock-

wise) to 100 % (control turned fully clockwise).

2 Adjust the effect time from [1/1] to [1/2].

3 Adjust the effect level from 100 % (control turned fully clockwise)

to 50 % (control set to the center position).

1 Operate an effect level control to adjust the effect

level.

Adjust the effect level from 0 % (control turned fully counterclockwise) to

100 % (control turned fully clockwise).

! Effect level: 0 % (control turned fully counterclockwise)

‣‡‣

FX1

LEVEL

SELECT SELECT SELECT

BEATS

! Effect level: 100 % (control turned fully clockwise)

‣‡‣

FX1

LEVEL

SELECT SELECT SELECT

BEATS

2 Operate the effect level control while pressing the

[SHIFT] button to adjust the effect time.

Adjust the effect time from [1/1] to [1/2].

The position of the effect level controls on the Serato DJ Intro screen

must be matched to the position of the effect level controls on this unit.

‣‡‣

FX1

LEVEL

SELECT SELECT SELECT

BEATS

SHIFT

When the position of the effect level controls on the Serato DJ Intro

screen matches the position of the effect level controls on this unit, the

effect time can be adjusted.

Effect time: [1/2]

‣‡‣

‣‡․

FX1

LEVEL

SELECT SELECT SELECT

BEATS

SHIFT

3 Operate an effect level control to adjust the effect

level.

Adjust the effect level from 100 % (control turned fully clockwise) to 50 %

(control set to the center position).

The position of the effect level controls on the Serato DJ Intro screen

must be matched to the position of the effect level controls on this unit.

‣‡․

FX1

LEVEL

SELECT SELECT SELECT

BEATS

When the position of the effect level controls on the Serato DJ Intro

screen matches the position of the effect level controls on this unit, the

effect time can be adjusted.

! Effect level: 50 % (control set to the center position)

‣‡․

FX1

LEVEL

SELECT SELECT SELECT

BEATS

Using the filter fade function

When the filter fade function is set to on, the filter effect is applied to

both decks when the crossfader is operated.

The filter (HPF) effect changes as the tracks on the two decks are mixed,

so the tracks blend together smoothly and you can mix them easily

without worrying about their genres and tempos.

The explanation below describes the operation of moving the crossfader

from the left edge to the right edge to mix the deck 1 track with the deck

2 track as an example.

Crossfader

Level

Deck 1 filter

Deck 2 filter

! When the crossfader is moved from the left edge towards the right,

the filter (HPF) effect on the deck 1 track changes from the mini-

mum, increasing as the fader approaches the right edge, until the

filter (HPF) effect is maximum when the right edge is reached.

When the crossfader is moved from the left edge towards the right,

the filter (HPF) effect on the deck 2 track changes from the maxi-

mum, decreasing as the fader approaches the right edge, until the

filter (HPF) effect is minimum when the right edge is reached.

1 Play tracks on decks 1 and 2.

2 Press the [FILTER FADE] button.

The button flashes and the filter fade function is set to on.

When the filter fade function is set to on, operation of the filter control is

disabled.

3 Move the crossfader from the left edge to the right

edge, or from the right edge to the left edge.

To mix from the deck 1 track to the deck 2 track, move the crossfader

from the left edge to the right edge.

To mix from the deck 2 track to the deck 1 track, move the crossfader

from the right edge to the left edge.

4 Press the [FILTER FADE] button again.

The button lights and the filter fade function is set to off.

When the filter control is operated while the filter fade function is set to

on, the filter control position at the time the filter fade function was set

to off is set.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Pioneer DDJ-SB Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Pioneer DDJ-SB