Pioneer DDJ-SB Bedienungsanleitung PDF herunterladen (Seite 7)

Connections and part names

Connections

Always disconnect the USB cable before making or changing equipment

connections.

Be sure to use the USB cable included with this product.

Refer to the operating instructions for the component to be connected.

With this unit, the power is supplied by USB bus power. The unit can be

used simply by connecting it to a computer using the USB cable.

Connect the computer to which this unit is to be connected to an AC

power supply.

! A USB hub cannot be used.

! In cases like the ones below, the power may be insufficient and this

unit may not operate on USB bus power.

— When the computer’s USB power supply capacity is insufficient.

— When other USB devices are connected to the computer.

— When headphones with an impedance of less than 32 W are

connected.

— When headphones are simultaneously connected to the stereo

phone jack and the stereo mini-phone jack.

— When a monaural jack is connected to the [HEADPHONES]

terminal.

Rear panel

USB

MASTER OUTMASTER OUT

1 32

Power amplifier, powered speakers, etc.

1 USB terminal

Connect to a computer.

! Connect this unit and the computer directly using the included

USB cable.

! A USB hub cannot be used.

2 Kensington security slot

3 MASTER OUT terminals

Connect a power amplifier, powered speakers, etc., here.

! Compatible with RCA pin-jack type unbalanced outputs.

Main unit side panel

Microphone

Headphones

321

1 MIC LEVEL control

Adjusts the audio level input to the [MIC] terminal.

2 MIC jack

Connects a microphone here.

3 HEADPHONES jacks

Connect headphones here.

Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø

3.5 mm) can be used.

! There are two input jacks, both a stereo phones jack and a mini

phones jack, but do not use both simultaneously. If both are used

simultaneously, when one is disconnected and/or connected, the

volume of the other may increase or decrease suddenly.

Part names and functions

The functions of the parts introduced here are based on the functions of

Serato DJ Intro.

Descriptions of functions that can be used after upgrading to Serato DJ

are indicated

Serato DJ

For details of the functions, see the Pioneer DJ support site below.

http://pioneerdj.com/support/

1 Browser section

2 Deck section

3 Mixer section

4 Effect section

Browser section

BROWSE

PA NEL

LOAD

BACK

LOAD

MAX

MIN

1 1 2 3

1 LOAD button

Press:

The selected tracks are loaded to the respective decks.

! When the [LOAD] button is pressed twice, the tracks loaded in

the selected deck on the opposite side are loaded into the deck

whose [LOAD] button was pressed. When this is done while

a track is playing, the track is played from the same position.

(Instant Double)

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Pioneer DDJ-SB Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio Pioneer DDJ-SB