Pioneer DEH-6100BT Bedienungsanleitung PDF herunterladen (Seite 43)

1 Display the initial setting menu.

Refer to Adjusting initial settings on the pre-

vious page.

2 Use MULTI-CONTROL to select

WARNING in the initial setting menu.

3 Press MULTI-CONTROL to turn warning

tone on.

# To turn warning tone off, press

MULTI-CONTROL again.

Switching the auxiliary setting

It is possible to use auxiliary device with this

unit. Activate the auxiliary setting when using

auxiliary device connected to this unit.

1 Display the initial setting menu.

Refer to Adjusting initial settings on the pre-

vious page.

2 Use MULTI-CONTROL to select AUX in

the initial setting menu.

3 Press MULTI-CONTROL to turn AUX on.

# To turn AUX off, press MULTI-CONTROL

again.

Setting the rear output and

subwoofer output

This unit’s rear output (rear speaker leads out-

put and RCA rear output) can be used for full-

range speaker (Rear SP :REAR) or subwoofer

(Rear SP :SUB W) connection. If you switch

the rear output setting to Rear SP :SUB W, you

can connect a rear speaker lead directly to a

subwoofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (Rear SP :REAR).

1 Display the initial setting menu.

Refer to Adjusting initial settings on the pre-

vious page.

2 Use MULTI-CONTROL to select REAR SP

in the initial setting menu.

3 Press MULTI-CONTROL to switch the

rear output setting.

Pressing MULTI-CONTROL will switch be-

tween Rear SP :REAR (full-range speaker) and

Rear SP :SUB W (subwoofer) and that status

will be displayed.

# When no subwoofer is connected to the rear

output, select Rear SP :REAR (full-range speaker).

# When a subwoofer is connected to the rear

output, select Rear SP :SUB W (subwoofer).

Notes

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to Using subwoofer output on page

40).

! If you change this setting, subwoofer output

in the audio menu will return to the factory

settings.

! Both rear speaker lead outputs and RCA rear

output are switched simultaneously in this

setting.

Switching the ever scroll

When Ever Scroll is set to ON, recorded text in-

formation scrolls continuously in the display.

Set to OFF if you prefer the information to

scroll just once.

1 Display the initial setting menu.

Refer to Adjusting initial settings on the pre-

vious page.

2 Use MULTI-CONTROL to select

EVERSCROLL in the initial setting menu.

3 Press MULTI-CONTROL to turn the ever

scroll on.

# To turn the Ever Scroll off, press

MULTI-CONTROL again.

Initial Settings

En

43

Section

10

Initial Settings

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare