Pioneer AVIC-Z1 Bedienungsanleitung PDF herunterladen (Seite 152)

150

Chapter 16

Customizing the Audio Setting related

with Audio Visual

AV

➲ “Setting the rear output and subwoofer

controller” ➞ Page 156

3 Touch  or  to adjust left/right speaker

balance.

Each time you touch  or  moves the left/

right speaker balance towards the left or the

right.

Left: 9 to Right: 9 is displayed as the left/

right speaker balance moves from left to right.

Using subwoofer output

The navigation system is equipped with a sub-

woofer output which can be turned on or off.

❒ When the subwoofer output is on, you can

adjust the cut-off frequency, the output level,

and the phase of the subwoofer.

1 Touch [Sub Woofer] in the Audio Settings

menu.

When Preout (the subwoofer controller set-

ting in System Settings menu) is Full, you

cannot select [Sub Woofer].

➲ Rear speaker setting ➞ Page 156

2 Touch [On] to turn subwoofer output on.

To turn subwoofer output off, touch [Off].

3 Touch [Reverse] or [Normal] to select the

phase of subwoofer output.

❒ If subwoofer output sound is not clear with

[Normal], change it to [Reverse].

4 Touch  or  to select cut-off frequency.

Each time you touch  or  selects cut-off fre-

quencies in the following order:

50 — 80 — 125 (Hz)

Only frequencies lower than those in the

selected range are output from the subwoofer.

5 Touch [+] or [–] to adjust the output level

of the subwoofer.

+6 to –6 is displayed as the level is increased

or decreased.

Using non fading output

When the non fading output setting is on, the

audio signal does not pass through navigation

system’s low pass filter (for the subwoofer), but is

output through the RCA output.

1 Touch [Non Fading] in the Audio Settings

menu.

Only when Preout (the subwoofer controller

setting in System Settings menu) is Full,

you can select [Non Fading].

➲ Rear speaker setting ➞ Page 156

2 Touch [On] to turn non fading output on.

To turn non fading output off, touch [Off].

3 Touch [+] or [–] to adjust the output level

of the non fading.

+6 to –6 is displayed as the level is increased

or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Touch [Loudness] in the Audio Settings

menu.

2 Touch [On] to turn loudness on.

To turn loudness off, touch [Off].

3 Touch  or  to select a desired level.

Each time you touch  or  selects level in

the following order:

Low — Mid — High

Using the high pass filter

When you do not want low sounds from the sub-

woofer output frequency range to play from the

front or rear speakers, turn the HPF (high pass fil-

ter) on. Only frequencies higher than those in the

selected range are output from the front or rear

speakers.

1 Touch [HPF] in the Audio Settings menu.

2 Touch [On] to turn high pass filter on.

To turn high pass filter off, touch [Off].

3 Touch  or  to select cut-off frequency.

Each time you touch  or  selects cut-off fre-

quencies in the following order:

50 — 80 — 125 (Hz)

When Preout (the subwoofer controller set-

ting in System Settings menu) is Sub.W,

the HPF function is effective for front speak-

ers only.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 206 207

Kommentare zu diesen Handbüchern

Keine Kommentare