Pioneer SBX-N700 Bedienungsanleitung PDF herunterladen (Seite 22)

Connecting22

En

Connecting

2

Wireless network connection

Another connection option is to use an

Access Point or a wireless router. The network

configuration and connection method may vary

depending on the equipment in use and the

network environment.

This unit is equipped with an IEEE 802.11n

(Dualband,2.4GHz/5GHzband)wireless

module, which also supports the 802.11a/b/g

standards. For the best wireless performance,

we recommend using a IEEE 802.11n certified

Wi-Fi network (access point or wireless router).

Wireless

Communication

Computer and/or

DLNA certified server

Access Point or

Wireless Router

Broadband

service

Refer to the setup instructions supplied with

your access point or wireless router for detailed

connection steps and network settings.

For best performance, a direct wired connection

from this unit to your home network’s router or

cable/DSL modem is always the best option.

If you do chose to use the wireless option, note

that performance can sometimes be affected

by other electronic devices in the home.

Wireless network setup

For the wireless network connection, the unit

needs to be set up for network communication.

This adjustment can be done from the

[Initial

Setup]

menu. Adjust the

[NETWORK]

setting

as follow. Setting up the access point or the

wireless router is required before connecting

the unit to the network.

Preparation

Before setting the wireless network, you need to:

- connect the broadband internet to the

wireless home network.

- set the access point or wireless router.

- note the SSID and security code of the

network.

1. Press

SETUP

.

The Initial Setup screen is displayed.

Select

[Network]

d

[Interface]

d

[Wireless]

and press

ENTER

.

2. Select

[Network]

d

[Wireless Setting]

d

[Next Screen]

and press

ENTER

.

3. Select

[Yes]

and press

ENTER

to continue.

The new connection settings reset the

current network settings.

4.

[Wireless Setting]

menu is displayed.

Use



/

b

to select

[Scan]

.

5. Then select

[Next]

using the

c

/

d

and press

ENTER

.

6. The unit scans the all available access

points or wireless routers within range and

display them as a list. Use



/

b

to select an

access point or wireless router on the list,

and then press

ENTER

.

If you have security on your access point or

wireless router, verify that the WEP or WPA

key that was entered into the unit matches

the router’s information exactly. You need to

input the security code as necessary.

72-MCS838-EU0B2_En.indd 22 2013/09/05 11:56:58

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare