Pioneer BDP-450-K Bedienungsanleitung PDF herunterladen (Seite 53)

Picture freezes and the front

panel and remote control

buttons stop working.

• Press  STOP to stop playback, then restart playback.

• If the playback cannot be stopped, press  STANDBY/ON on the

player’s front panel to turn off the power, then turn the power back on.

• If the power cannot be turned off (to standby), reset the unit.

On the BDP-450, press and hold  STANDBY/ON on the main unit’s

front panel for over 5 seconds. On the BDP-150, use a thin rod to press

the reset button on the main unit’s front panel. The unit restarts and

can now be operated.

• It may not be possible to play scratched discs.

No picture is displayed or

picture is not output in high

definition when playing BDs.

With some discs, it may not be possible to output the video signals from

the

VIDEO

output terminal. In this case, connect using an HDMI cable

(page 17).

• Picture is disturbed during

playback.

• Picture is dark.

• This player supports Rovi analog copy protection technology. With

some TVs (such as with built-in video deck), the picture will not be

displayed properly when the copy protected DVD title is played. This is

not a malfunction.

• If the player and TV are connected via a DVD recorder/video deck,

etc., the picture will not be displayed properly due to analog copy

protection. Connect the player and TV directly.

• Picture is stretched.

• Picture is cropped.

• Aspect ratio cannot be

switched.

Is the TV’s aspect ratio

properly set?

Read the operating instructions for the TV and set the TV’s aspect ratio

properly.

Is TV Screen properly set? Set TV Screen properly (page 40).

When video signals with a resolution of 1080/50i, 1080/50p, 720/50p,

1080/24p, 1080/60i, 1080/60p or 720/60p are being output from the

HDMI OUT

terminal, they may be output with an aspect ratio of 16:9

even if

TV Screen

is set to

4:3 Pan&Scan

(page 40).

Picture is interrupted. The picture may be interrupted when the resolution of the recorded

video signal switches. Set Resolution to something other than Auto

(page 41).

The subtitles cannot be

switched.

The subtitles cannot be switched for discs recorded on a DVD or BD

recorder.

• No sound is output.

• Sound is not output

properly.

Is the disc played back in

slow motion?

Is the disc played back in fast

forward or fast reverse?

No sound is output during slow motion play and forward and reverse

scanning.

Are the audio cables properly

connected?

• Connect the cable properly according to the connected devices

(page 17).

• Insert the cable firmly and all the way in.

Is the audio cable damaged? If the cable is damaged, replace it with a new one.

Is Audio Output properly

set?

Set Audio Output properly, according to the connected device

(page 41).

Are the connected

components (AV receiver or

amplifier, etc.) properly set?

Read the operating instructions for the connected components and

check the volume, input, speaker settings, etc.

Is HDMI Audio Out properl

set?

Set

HDMI Audio Out to Re-encode or PCM. (page 42).

Is the output video resolution

properly set?

• For the BDP-450, switch the setting at Resolution (page 41).

• For the BDP-150, switch the resolution at which the video and audio

are output by pressing HDMI.

Is a DVI device connected? The sound will not be output from the HDMI OUT terminal if a DVI

device is connected. Connect the device to a DIGITAL OUT terminal or

the AUDIO OUT terminals (page 21).

For some BDs, audio signals are only output from DIGITAL OUT

terminal or the HDMI OUT terminal.

For the BDP-450:

Is the HDMI Mode set

appropriately?

Set the HDMI Mode properly, according to the connected device

(page 41).

Problem Check Remedy

BDP-450_VXE8_IBD_EN.book 53 ページ２０１２年６月２２日　金曜日　午後２時１１分

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Pioneer BDP-450-K Bedienungsanleitung Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heimkinosysteme Pioneer BDP-450-K