Pioneer S-DV77ST Bedienungsanleitung Seite 62

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 100
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 61
62
En/ChH
Advanced Sound Settings9
高級音聲設置
動態範圍控制
音源的動態範圍是指其最輕音至其最響音之間的範
圍。杜比數碼電影原聲的動態範圍十分寬廣,因此
音響效果非常激動人心,但是如此一來就會產生問
題:若將音量調低,較輕的對白容易聽不清。打開
動態範圍控制功能即可平衡電影原聲的音量。
1 SYSTEM SETUP
÷ 同時按SHIFT按鈕啟用該功能。
2 23按鈕,直到在顯示屏中看見D.R.C.
3 5按鈕選擇動態範圍設置。
÷ D.R.C. OFF 默認設置(不改變動態範圍)
÷ D.R.C. LOW 少量減小動態範圍
÷ D.R.C. MEDIUM 中等設置
÷ D.R.C. HIGH 大量減小動態範圍(低音量欣賞
時較佳)
4 ENTER設定。
Dynamic Range Control
The dynamic range of a source is the difference between
the quietest and the loudest sounds. The dynamic range
of Dolby Digital soundtracks can be very great. This
makes them exciting, but it also means that when you
turn the volume down you can easily lose quiet dialog.
Switch on Dynamic Range Control to even out the
soundtrack volume.
1 Press SYSTEM SETUP.
Access this function together with the
SHIFT button.
2 Press the 2 or 3 button until you see D.
R.C. in the display.
3 Use the 5 and buttons to select a
dynamic range setting.
D.R.C. OFF Default setting (no change to the
dynamics)
D.R.C. LOW Dynamic range is reduced by a
small amount.
D.R.C. MEDIUM Mid setting
D.R.C. HIGH Dynamic range is reduced by a
large amount (good for listening at very low volume).
4 Press ENTER to make the setting.
LFE衰減器
如果副低音揚聲器失真,則利用
LFE
Low
Frequency Effects
低頻效果)衰減器降低其音
平。
1 SYSTEM SETUP
÷ 同時按SHIFT按鈕啟用該功能。
2 23按鈕,直到在顯示屏中看見LFE
ATT
3 5按鈕選擇衰減設置。
÷ LFE ATT 0 默認設置(無衰減)
÷ LFE ATT 10 聲道衰減(減弱)10dB
÷ ATT OFF 聲道關閉
4 ENTER設定。
LFE Attenuator
Use the LFE (Low Frequency Effects) attenuator to
reduce the subwoofer level if it is distorting.
1 Press SYSTEM SETUP.
Access this function together with the
SHIFT button.
2 Press the 2 or 3 button until you see LFE
ATT in the display.
3 Use the 5 and buttons to select a
dynamic range setting.
LFE ATT 0 Default setting (no attenuation)
LFE ATT 10 The LFE channel is attenuated
(reduced) by 10dB.
ATT OFF The LFE channel is switched off.
4 Press ENTER to make the setting.
Seitenansicht 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare