Pioneer PDP-428XD Bedienungsanleitung PDF herunterladen (Seite 27)

Setting up 08

English

11 Select “Colour System” (

/

12 Select a colour system (

/

You can select from among “Auto”, “PAL”, “SECAM”, and “4.43NTSC”.

13 Select “Store” (

/

14 Select “Yes”, “Yes (Listed)”, or “No” (

/

15 Press HOME MENU to exit the menu.

• Alternatively, to set up for another channel, repeat steps 6 to 14.

Note

• The above procedure transfers and sets the selected channel

information to the connected recording equipment such as a

VCR or DVD/HDD recorder (DVR).

• Manual Adjust also allows you to make selections for “Tuner

NR”, “Child Lock”, and “Decoder”. See Reducing video noise,

Setting Child Lock, and Selecting a decoder input terminal.

Reducing video noise

For the individual channels, you can specify whether the plasma

television should reduce video noise depending on the levels of

broadcasting signals.

1 Press HOME MENU.

2 Select “Setup” (

/

then ENTER).

3 Select “Analogue TV Setup” (

/

then ENTER).

The password entry screen appears. Enter your four-digit password

using buttons 0 to 9. For the password, see Using a password on

page 55.

4 Select “Manual Adjust” (

/

then ENTER).

5 Select “Programme Entry” (

/

6 Select a programme number (

/

You can select 1 through 99.

7 Select “Tuner NR” (

/

8 Select “On” (

/

9 Press HOME MENU to exit the menu.

Note

• This function may not achieve a satisfactory result, depending on

the conditions of broadcasting signals.

• When using a decoder with a decoder terminal selected, this

function may fail to achieve a good result.

• The factory default is “On”.

Setting Child Lock

Child Lock inhibits selected TV channels from being tuned and

watched.

1 Repeat steps 1 to 6 provided for

Reducing video noise

After selecting a channel (using Programme Entry), perform the

following steps:

2 Select “Child Lock” (

/

3 Select “Block” (

/

• The selection is switched between “View” (factory default) and

“Block”.

4 Press HOME MENU to exit the menu.

Selecting a decoder input terminal

If you have connected a decoder, select a decoder input terminal

(INPUT 1).

1 Repeat steps 1 to 6 provided for

Reducing video noise

After selecting a channel (using Programme Entry), perform the

following steps:

2 Select “Decoder” (

/

3 Select “INPUT 1” (

/

4 Press HOME MENU to exit the menu.

Note

• With “Off” (factory default) selected, you cannot watch any

images from the decoder.

• While watching DTV, no image is output to the decoder.

Item Description

Yes You can select the channel using P+/P–

Yes (Listed) Select this option to register the channel as your

favourite channel.

You can select the channel using the Favourite

Channel list and P+/P–.

No You cannot select the channel using P+/P–

PDP-508XD.book Page 27 Thursday, April 26, 2007 2:34 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 259 260

Kommentare zu diesen Handbüchern

Keine Kommentare

Pioneer PDP-428XD Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heimkinosysteme Pioneer PDP-428XD