Pioneer PDP-428XD Bedienungsanleitung PDF herunterladen (Seite 40)

Enjoying DTV broadcasts09

Checking signal strength

You can check the signal strength and signal quality of each TV

channel.

1 Press

HOME MENU

2 Select “Setup” (

/

then

ENTER

3 Select “DTV Setup” (

/

then

ENTER

4 Select “Installation” (

/

then

ENTER

• The password entry screen appears. Enter your four-digit

password using buttons 0 to 9.

5 Select “Signal Check” (

/

then

ENTER

6 Select “RF Channel” (

/

then

ENTER

7 Select the channel to be checked (

/

• Use “Add New Channels” function here to add channels within

the selected RF channel (receiving frequency).

Note

• You can select “DTV Setup” only when watching DTV channels.

Switching on/off the power to the antenna

Use the following procedure to switch on or off the power to the

antenna connected with the DTV antenna terminal.

1 Repeat steps 1 to 4 provided for

Checking signal strength

2 Select “Aerial Power” (

/

3 Select “On” or “Off” (default) (

/

Caution

• When the “Aerial Power” setting is on, directly connect the

aerial to the ANT input terminal at the rear of the plasma

television. Connecting any device between the aerial and

plasma television may cause damage to the device.

Note

• You can select “DTV Setup” only when watching DTV channels.

Restoring the system defaults

Use this function only when you wish to reset all the DTV settings to

the factory defaults.

1 Repeat steps 1 to 4 provided for

Checking signal strength

2 Select “Restore System Defaults” (

/

then

ENTER

• A confirmation screen appears.

3 With “OK” pressed, the system restores the factory defaults.

Then Auto Installation is initiated automatically.

Note

• The password entry screen does not appear if you have disabled

the password function. For details, see Using a password on

page 55.

• You can select “DTV Setup” only when watching DTV channels.

Customizing channel related settings

This section describes how to customize various channel related

settings. These settings include favourite channel registration,

Channel Skip, and Channel Lock.

Setting Channel Options

Use the following procedure to select individual channels and

switch on the Favourite, Channel Skip, or Channel Lock for the

channels.

1Press

HOME MENU

2 Select “Setup” (

/

then

ENTER

3 Select “DTV Setup” (

/

then

ENTER

4 Select “Channel Management” (

/

then

ENTER

• The password entry screen appears. Enter your four-digit

password using buttons 0 to 9.

5 Select “Channel Options” (

/

then

ENTER

• The Channel Options screen with a list of registered channels

appears.

6 Select an individual channel (

///

then

ENTER

to select

on/off).

• Select “On” for Favourites if you want the channel to be

registered as your favourite (digital) channels. Selecting from

the registered list may be the easiest way to tune to those

channels.

• Select “On” for Channel Skip if you want the channel to be

skipped when operating P+/P– on the remote control unit or

CHANNEL +/– on the plasma television.

• Select “On” for Channel Lock if you want the channel not to be

tuned without password entry.

Signal Check

Signal Strength

0 25 50 75 100

Signal Quality

Add New Channels

77%

100% Good

RF Channel

Channel Options

Channel Skip

001 ∗∗∗ ∗∗∗

002 ∗∗∗ ∗∗∗

007 ∗∗∗ ∗∗∗∗∗

030 ∗∗∗∗ ∗∗∗∗∗∗∗

040 ∗∗∗ ∗∗∗∗ ∗∗

051 ∗∗∗ ∗

800 ∗∗∗ ∗∗∗∗∗∗∗∗∗∗

PDP-508XD.book Page 40 Thursday, April 26, 2007 2:34 PM

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 259 260

Pioneer PDP-428XD Bedienungsanleitung Seite 40

Kommentare zu diesen Handbüchern

Pioneer PDP-428XD Bedienungsanleitung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heimkinosysteme Pioneer PDP-428XD